Home > Arduino & SCM Supplies > OPENJUMPER
OPENJUMPER OJ-KZ008 Zduino Ethernet (5100) Module Works with Official Arduino Ethernet - Red + Black
Brand OPENJUMPER Model OJ-KZ008 Quantity 1 Color Red + black Material PCB Features Zduino Ethernet£¬ which contains USB download£¬ POE power£¬ TF card slot etc. as well as lead foot position£¬ is a micro controller board based on Arduino Ethernet; With this module£¬ you can connect micro controller to internet and build your network application. The built-in W5100 network module can transform Arduino into a web server; It can use Ethernet library file in IDE to make a simple web server; It also supports Micro SD card reading and writing. Specification Processor: ATmega328p; Working voltage: 5V; Best input voltage: 7~12V (40V max.); POE input module voltage: 7~30V (48V is needed); I/O foot: 14; 3£¬ 5£¬ 6£¬ 9£¬ 10£¬ 11 interfaces are for PWM output; 10£¬ 11£¬ 12£¬ 13 interfaces are for SPI communication; interface 4 is for TF card CS; Interface 10 is for W5100 CS; Interface 2 is for disconnecting; Analogue input pin: 6; DC output of each I/O: 40mA (The total working current of the processor should not exceed 200mA 3.3V); DC output: 50mA; Flash memory: 32KB (0.5KB for bootloader£¬ 2KB for SRAM£¬ 1KB for EEPROM); Working clock: 16 MHz; TCP/IP Ethernet controller W5100 supports Power Over Ethernet£¬ Micro SD card (TF card); Micro USB download: Supports Micro SD (8GB max.) reading and writing; Ethernet and Micro SD card use the same SPI slot via time-sharing multiplexing technology interface 4 and 10; More SPI connection is supported when interface 4 and 10 are prioritized; Compatibility: Arduino Duemilanove (168 or 328)£¬ Arduino UNO. (Does not support Arduino Mega 1280 and Arduino Mega 2560) Application N/A English Manual/Spec Yes (electronic files) Packing List 1 x Module