Home > Arduino & SCM Supplies > SupTronics
SupTronics X6000 7.1 Channel Expansion Board for Raspberry Pi 3- Black
Overview: For Use With: Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B Power Supply Unit(Not included): please refer to sku: 458603 If you want X6000-7.1CH kit£¬ please refer to sku: 458647 Operating System: - OSMC(2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound) - Moode Audio Player(2.0 stereo audio outputs) - Raspbian Jessie(2.0 stereo audio outputs) - Openelec(To be tested) - Volumio(To be tested) - Rune audio(To be tested) - Pi Core Player(To be tested) Features: - Ideal for Home Theater Systems - Ideal for 7.1 channel surround audio systems - Used four ESS Tech Sabre premier stereo DACs ES9023 - ES9023 delivers jitter-free studio quality audio with 112dB DNR - Each DAC has independent ultra-low-jitter clock generator - Used the Texas Instruments ultra-low-noise voltage regulator - Supports up to 1TB 2.5-inch SATA hard drives - High quality video performance - Supports SPDIF Optical Digital Audio - Supports HDMI high-bit-rate (HBR) audio - 4 analog stereo 3.5mm jack outputs - Selected high quality components (Solid Capacitors£¬ Murata MLCC etc) - Allows you to split the audio stream from a HDMI signal - No HDMI output connection is required to receive audio at the analog and optical outputs - Connects directly to the Raspberry Pi - Powers the Raspberry Pi - no additional power supply - Access to Raspberry Pi GPIO - Easy DIY with Raspberry Pi Specification: - Power supply: +5Vdc +/-5% - Input Ports: 1 x HDMI - Output Ports: 1 x HDMI£¬ 1 x Optical£¬ 4 x 3.5mm Phone Jack - Analog audio output level: 2V RMS - Optical S/PDIF Audio Sampling Rate: Up to 192 kHz - HDMI Audio Format: LPCM 2/5.1/7.1CH£¬ Dolby Digital 2~5.1CH£¬ DTS 2~5.1CH£¬ Dolby Digital Plus Dolby TrueHD£¬ and DTS-HD Master Audio - Optical Audio Format: LPCM 2CH£¬ Dolby Digital 2~5.1CH£¬ and DTS 2~5.1CH